Россия, 443079, г.Самара, ул.Авроры 114А

Телефон: (846)

 266-66-66

 

Поиск
 Главная  Main page  Equipment  Chiller  Scroll chiller

 

 

 

Калькуляторы

Chiller - Scroll chiller

111

Scroll chiller

Components of a chiller:

1 – compressor

3 – evaporator (located on the same frame inside the room)

2 – condenser (located outside (remote) and connected with the unit by two copper pipes).

ЧВС system is similar to ЧБС system, but in this case the compressor is located inside the room together with the evaporator, what prevents the evaporator from defrosting in winter. After a long stop of compressor there is no need in heating before starting, it is only needed to set additional options (БТ) that are responsible for condensation pressure control and heat a piping and a condenser before starting. Although, one should remember that the unit needs a ventilated unit room, as the unit during operation will discharge heat, and there will also be a need in sound proof unit room so that its operation process will not be so loud. During installation works of the equipment as well as in ЧБС system it is necessary to contact the installer.

Advantages of the system:

1- there is no possibility of defrosting the evaporator from an ambient temperature,

2- there is no need in using an additional option (Г) for compressor heating,

3- operation at low air temperature (to -32C) is possible (while installing additional options (БТ) to control condensation pressure and heating of refrigeration circuit).

Disadvantages of the system:

1 – an additional ventilated space for compressor,

2 – compressor produces heat and noise in a room.

3 – there is a necessity to perform qualified assembling works. 

Защита от автоматического заполнения:

CAPTCHA

Введите символы с картинки:



Применение в отраслях

LEADER-S Ltd.

Samara, Avrora st. 114A

tel: (846) 266 66 62   

e-mail:illarionov@leader-cool.ru

Components of a chiller:

1 – compressor

3 – evaporator (located on the same frame inside the room)

2 – condenser (located outside (remote) and connected with the unit by two copper pipes).

ЧВС system is similar to ЧБС system, but in this case the compressor is located inside the room together with the evaporator, what prevents the evaporator from defrosting in winter. After a long stop of compressor there is no need in heating before starting, it is only needed to set additional options (БТ) that are responsible for condensation pressure control and heat a piping and a condenser before starting. Although, one should remember that the unit needs a ventilated unit room, as the unit during operation will discharge heat, and there will also be a need in sound proof unit room so that its operation process will not be so loud. During installation works of the equipment as well as in ЧБС system it is necessary to contact the installer.

Advantages of the system:

1- there is no possibility of defrosting the evaporator from an ambient temperature,

2- there is no need in using an additional option (Г) for compressor heating,

3- operation at low air temperature (to -32C) is possible (while installing additional options (БТ) to control condensation pressure and heating of refrigeration circuit).

Disadvantages of the system:

1 – an additional ventilated space for compressor,

2 – compressor produces heat and noise in a room.

3 – there is a necessity to perform qualified assembling works. 

Наверх